VVDI MB Tool Password calculation support working key mode and lost all key mode. WORKING KEY MODE NEED PAY 1 TIME FOR SUCCESS CALCULATION . L OST ALL KEY NEED PAY 2 TIMES FOR SUCCESS CALCULATION
Password calculation – working key: can get key password through EIS and
working key (online)
CAN protocol EIS all support password calculation
Support BGA keys and other NEC keys
Support calculate password for NEC v51, v57 keys. No soldering, safe method.
Data acquisition time depends on the key version. It needs about 3.5 – 13 minutes
BGA version need about 5 minutes, some versions only need 3.5 minutes
Calculate time in server: 30 seconds – 1 minute
Password calculation – lost all key: support W166, W212, W246, W212(old with ELV)
EIS for password calculation while lost all working key
Lost all key data acquisition time depends on EIS type, It needs about 3.5-8 minutes
Lost all key calculate time in server: 30 seconds – 1 minute
Support type
Add key support type
W164
W164 2009-
W166, 197, 212, 218, 246
W169, 209, 211
W172, 204, 207, 212(old with ELV)
W216
W221
W639 2009-
Lost all key support type
W166, 197, 212, 218, 246
W212 (old with ELV)
Functions
Mode: OBD and IR adapter, mode use for communicate with EIS
Chassis: Select chassis number, you can detect it with auto detect in EIS Tools
Data Acquisition:
Press “Data Acquisition”, it will continue with following steps automatically
1. Insert working key to ignition, waiting 15 seconds
2. Insert working key to device IR reader, verify key and car
3. Data acquisition
4. Insert working key to ignition, waiting 30 seconds
5. Insert working key to device IR reader, wait end…
6. Save acquisition data
Upload Data: Upload saved acquisition data to server for calculate password. Attention: Once success calculate password for one SSID, the server will not accept calculate the acquisition data with same SSID in 2 hours. After 2 hours, acquisition data with same
SSID upload to server will start with a new task
Query result: Query server calculation result. The password will fill in key password area automatically after success calculation. Use “Copy” copy password to clipboard
Auto reflash: Program will auto re-flash server result until there’s no task for this device.You can start data acquisition once more while auto reflash starting
Stop acquisite after success: If you are run data acquisition while auto reflash running, program will stop the acquisition progress when find correct password
About query result status
Query result support query calculation result in 24 hours, others don’t support Query result will display Time, SSID, Status, Filename (name when upload to server)
Status has the following types:
1. Queuing: number x, require about y minutes, means your task need y minutes
2. Processing: requires 1 minutes, means your task need 1 minute to finish
3. Password: xxxxxxxxxxxxxxxx (Free), means success find password, “Free” show
this task is calculated for free or this task already success calculated before
4. Discard: Once you success calculate the password, in 2 hours, the upload
acquisition data with same SSID will discard
5. Already upload: means the server already have this file in queuing
6. Pay for password calculation before upload: means your device doesn’t have
authorize for calculation. Contact your dealer and pay for password calculation
7. Failed: means this task failed to get password, you can run data acquisition again.Failed task is always free
How to Prepare Key File
Prepare key file means prepare the key file which you will write to new key (online)
Step 1: Load EIS file with password. The file can auto detected by VVDI-MB TOOL
Support VVDI-MB type and old Motorola EEPROM dump file
If the loaded EIS don’t contain key password, paste your password with “Paste”
After load file key position show blue means it is used
After load file key position show green means it is unused
After load file key position show gray means it is disabled
Step 2: Press “Prepare Key File”. This function need online, about 20 seconds
It will prepare the key file after success find in server
After prepare key file, key position show green means success
After prepare key file, key position show red means failed
